700234

冷 却液输送油箱异常

The circuit breaker inside the electrical cabinet switched off. Use the signature indicated on this alarm to locate the circuit breaker and restore it.

700235

冷 却液输送油箱异常

冷 却液单元发信号至PLC，显示其内部有故障。

700236

电气柜驱动的第 一扇页故障

The circuit breaker inside the electrical cabinet switched off. Use the signature indicated on this alarm to locate the circuit breaker and restore it.

700237

电气柜驱动的第 二扇页故障

The circuit breaker inside the electrical cabinet switched off. Use the signature indicated on this alarm to locate the circuit breaker and restore it.

700241

电气柜空调故障

The circuit breaker inside the electrical cabinet switched off. Use the signature indicated on this alarm to locate the circuit breaker and restore it.

700300

比例卡异常（RAM补偿无效）

静压补偿控制卡有故障。在这种情况下，RAM补偿无效，因此加工允许公差不能用于产品工件上。

700301

比例卡异常（静压拉杆无效）

The proportional compensation card indicates a trouble inside it. In this condition, the compensation of active tie rods of RAM turns out to be ineffective and so the machining tolerances cannot be granted on the production workpieces.

700306

旁通干涉功能启动

使得互锁区域的旁通功能生效并得以保持。如果是在手动模式下，再按一次位于主控面板上的T10用户键，可以复位或是在自动模式(MDI 和 AUTO)，执行M34功能。更多信息请参见7.3.1章的主控制面板和7.4.1章的M功能。